徐工刮板大链条方块活节#708060

刮板链条常见的故障

1.料条太松，与沥青混合料相刮碰；

2.沥青混合料中混入钢筋等杂物，将链条卡死，使刮板不能转动；

3.摊铺机底板连接螺栓松动或底板开裂翘曲，将刮板输料器卡死。

4.右侧刮板链条断裂。

5.刮板链条前后两端轴承损坏。一般是因为轴承外面的油封和尘套损坏，沥青混合料进入后，引起刮板卡死或阻力过大，致使轴承损坏传动链条材料为优质的合金钢材。

 

 

免责声明丨 部分内容来源网络！本文仅供交流学习 , 版权归属原作者，部分图片、内容推送时未能及时与原作者取得联系，若来源标注错误或侵犯到您的权益烦请告知，我们将立即删除.

 

 

 

 

企业介绍

公司供应摊铺机配件，压路机配件，铣刨机配件，摊铺机刮板驱动轴，刮板驱动轴总成，找平仪，找平仪支架以及液压泵和配件。还供应摊铺机易损件，摊铺机平衡梁，搅龙轴，踏板，输料底板，叶片，熨平板，减速机，链轨，履带板，支重轮，刮板大链条，输料链条等。

 

联系人：梁经理

联系方式：13645201509

（微信同号）

QQ：2870202745

 

 

 

QQ邮箱：2870202745@qq.com

 

 

网易邮箱：LS13645201509@163.com

 

 

Common faults of scraper chains

 

 

1. The material strip is too loose and scrapes against the asphalt mixture;

 

 

2. When steel bars and other debris are mixed into the asphalt mixture, the chain is stuck and the scraper cannot rotate;

 

 

3. If the connecting bolts of the bottom plate of the paver are loose or the bottom plate is cracked or warped, the scraper feeder will be stuck.

 

 

4. The right scraper chain is broken.

 

 

5. The bearings at both ends of the scraper chain are damaged. Usually, it is because the oil seal and dust sleeve outside the bearing are damaged, and the asphalt mixture enters, causing the scraper to get stuck or have excessive resistance, resulting in bearing damage. The transmission chain material is high-quality alloy steel.

 

 

Disclaimer | Part of the content is sourced from the internet! This article is for communication and learning purposes only, and the copyright belongs to the original author. Some images and content were not promptly communicated to the original author. If the source labeling is incorrect or infringes on your rights, please inform us and we will immediately delete it

 

 

Enterprise Introduction

 

 

The company supplies paver accessories, roller accessories, milling machine accessories, paver scraper drive shaft, scraper drive shaft assembly, leveling instrument, leveling instrument bracket, hydraulic pump and accessories. We also supply vulnerable parts for pavers, balance beams, agitator shafts, pedals, feeding soleplates, blades, ironing plates, reducers, chain tracks, track shoes, supporting wheels, scraper chains, feeding chains, etc.

 

 

Contact person: Manager Liang

 

 

Contact information: 13645201509

 

 

(Same WeChat account)

 

 

QQ: 2870202745

 

 

QQ email: 2870202745@qq.com

 

 

 

 

 

NetEase email: LS13645201509@163.com