找平仪的滑靴#2462560025

平衡梁的原理：通过内部CAN总线网络将传感器-超声波滑靴组合起来，进而检测路面的不同位置，再将检测的数据进行智能筛选与处理，最后将处理后的数据送给控制器，控制器根据数据判断当前摊铺机的工作状态，进而输出对摊铺机找平液压系统的控制信号，至此达到自动找平之目的。

免责声明丨 部分内容来源网络！本文仅供交流学习 , 版权归属原作者，部分图片、内容推送时未能及时与原作者取得联系，若来源标注错误或侵犯到您的权益烦请告知，我们将立即删除.

 

 

企业介绍

公司供应摊铺机配件，压路机配件，铣刨机配件，摊铺机刮板驱动轴，刮板驱动轴总成，找平仪，找平仪支架以及液压泵和配件。还供应摊铺机易损件，摊铺机平衡梁，搅龙轴，踏板，输料底板，叶片，熨平板，减速机，链轨，履带板，支重轮，刮板大链条，输料链条等。

 

联系人：梁经理

联系方式：13645201509

（微信同号）

QQ：2870202745

 

QQ邮箱：2870202745@qq.com

网易邮箱：LS13645201509@163.com

The principle of balanced beam: By combining sensors and ultrasonic shoes through an internal CAN bus network, different positions of the road surface are detected, and the detected data is intelligently screened and processed. Finally, the processed data is sent to the controller, which determines the working status of the current paver based on the data and outputs control signals for the leveling hydraulic system of the paver, achieving the goal of automatic leveling.

Disclaimer | Part of the content is sourced from the internet! This article is for communication and learning purposes only, and the copyright belongs to the original author. Some images and content were not promptly communicated to the original author. If the source labeling is incorrect or infringes on your rights, please inform us and we will immediately delete it

Enterprise Introduction

The company supplies paver accessories, roller accessories, milling machine accessories, paver scraper drive shaft, scraper drive shaft assembly, leveling instrument, leveling instrument bracket, hydraulic pump and accessories. We also supply vulnerable parts for pavers, balance beams, agitator shafts, pedals, feeding soleplates, blades, ironing plates, reducers, chain tracks, track shoes, supporting wheels, scraper chains, feeding chains, etc.

Contact person: Manager Liang

Contact information: 13645201509

(Same WeChat account)

QQ: 2870202745

QQ email: 2870202745@qq.com

NetEase email: LS13645201509@163.com