徐工RP951沥青摊铺机配件及维修

浮动压力开关#87983011

文章出处:工程机械之家http://www.700618.com/人气: 发表时间:2023-05-26 10:10:17

压力开关是一种简单的压力控制装置,当被测压力达到额定值时,压力开关可发出警报或控制信号。压力开关的工作原理是:当被测压力超过额定值时,弹性元件的自由端产生位移,直接或经过比较后推动开关元件,改变开关元件的通断状态,达到控制被测压力的目的。

 

免责声明丨 部分内容来源网络!本文仅供交流学习 , 版权归属原作者,部分图片、内容推送时未能及时与原作者取得联系,若来源标注错误或侵犯到您的权益烦请告知,我们将立即删除

QQ邮箱:2870202745@qq.com

 

The pressure switch is a simple pressure control device. When the measured pressure reaches the rated value, the pressure switch can send an alarm or control signal. The working principle of the pressure switch is that when the measured pressure exceeds the rated value, the free end of the elastic element will generate displacement, directly or after comparison, push the switch element, change the on-off state of the switch element, and achieve the purpose of controlling the measured pressure.

Disclaimer | Part of the content comes from the network! This article is only for communication and learning. The copyright belongs to the original author. Some pictures and content are not timely contacted with the original author when being pushed. If the source label is incorrect or infringes your rights and interests, please inform us and we will delete it immediately

QQ Email: 2870202745@qq.com

推荐产品
$Pros$